Why choose the Faraone canopies?

YOUR CANOPY IN SAFETY

We are ready for everything!

Snow loading on the canopy mod. Linea

The continuous testing on our products makes our systems more and more performing.

Some examples of load tests

900 kg total on a 200 x 150 cm canopy

Glass plate alignment

The Linea Maxi canopy model has no length limits.

The presser continuously supports the weight of the glass.
Safety first! The safety bolt is an added value.
Safety first! The safety bolt is an added value.

La Faraone designs in absolute compliance with all safety standards.

Innovation

WHY CHOOSE LINEA MINI

Anodised aluminium profile, designed to withstand 270 kg/sqm with glass up to 100 cm deep.

Minimal design and tempered laminated 8+8+1.52 SG glass with depth from 60 to 100 cm.
Ideal projection for house entrances, windows, shops, balconies, etc., to protect from rain and snow or to be used as sunshades (opaque interlayer or colored glass).
Safety. In order to carefully comply with the safety regulations, it is recommended to always use glass with rigid SG interlayer (SentryGlas or similar).
Assembly and inspection only from below.
It can be installed without length limit.

WHY CHOOSE LINEA MAXI

Anodised aluminium profile, designed to withstand 300 kg/sqm with glass up to 150 cm deep.

Minimal design, it’s Linea Mini’s eldest sister.
Tempered laminated 10+10+1.52 SG glass with depth up to 150 cm.
Tempered laminated 12+12+1.52 SG glass (SentryGlas or similar) with depth up to 150 cm.
Safety. In order to carefully comply with the safety regulations, it is recommended to always use glass with rigid SG interlayer (SentryGlas or similar).
Assembly and inspection only from below.
It can be installed without length limit.

The test reports of the Faraone canopies

Request full test reports

Linea Mini

Linea Maxi

The Faraone canopy systems are designed to counteract static stress, snow load, and those dynamics due to wind forces.

The canopy tests are made on reinforced concrete beams, on solid masonry and on steel beams with relative chemical
anchorages depending on the intended use, obtaining the maximum possible safety.

Attention!

For the choice of anchoring on the masonry or the load-bearing holes, you need to check the type of wall with a professional designer.

The test certificate has no validity if the installation is not done as
described in the catalogue, and if the provided fixing screws are not
used as indicated.
For fixing to the wall, use only certified screws as supplied or indicated.

FARAONE canopies are designed to reach and exceed a load of 300 kg/sqm:

- LINEA MINI: up to 100 cm

- LINEA MAXI: up to 150 cm